India's Trusted Manufacturer & Suppliers of Electrical Cable Accessories, Earthing And Lightning Protection, Cable Jointing And Termination Kit Components and Copper Braids .

Copper Compression Lugs - Short Barrel

Products We Offer : Electrical Cable Accessories Cable Terminal Ends Crimping Type Copper Tubular Cable Terminal Ends Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Four Hole Cable Terminal Ends Tinned Copper Tubular Cable Lugs (Without Inspection Hole) Long Barrel Tinned Copper Cable Terminal Ends Copper Cable Terminal Ends With Extended Palm (2 Hole) High Voltage Copper Terminals - 33 KV Tubular Compression Cable Lugs (As Per DIN 46235) Cable Terminal Ends As Per Australian Standard Narrow Palm - Circuit Breaker Cable Terminal Ends Long Palm Long Barrel Cable Terminals Mechanical Cable Lugs - Bolted With 2 Screws and 4 Screws Aluminium - Copper Bi-Metal Terminals (With Copper Palms) Aluminium Terminals Aluminium Forged Cable Lugs (As Per DIN 46329) Aluminium 3 - Core Sector Cable Lugs Aluminium 4 - Core Sector Cable Lugs Ring Type Tinned Copper Cable Terminal Ends - Insulated & Non Insulated Ring Type Tinned Copper Cable Terminal Ends (Non Insulated) Fork Type Tinned Copper Cable Terminal Ends (Non Insulated & Insulated) Copper Pin Type Cable Terminal Ends Copper Flat Type Cable Terminal Ends Copper Insulated Pin Type Cable Terminal Ends Copper Insulated Flat Type Cable Terminal Ends Snap On Terminals Copper Reducer Pin Type Terminal Ends Copper One Hole Offset Tongue Terminal Ends / Connectors Copper Compression Lugs - Short Barrel Copper Compression Lugs - Long Barrel Copper Compression Lugs - Long Barrel, 2 Holes Copper Standard Wall Starter Terminal Ends Ring Type Tinned Copper Cable Terminal Ends (Non Insulated) Special Cable Terminal Ends

Connectors

Crimping Tools

Brass Cable Gland Kits & Accessories

Copper Compression Lugs - Short Barrel

Manufacturer, Supplier & Dealer of Copper Compression Lugs - Short Barrel

Looking For Copper Compression Lugs - Short Barrel Price in India.

Check Price

Copper Compression Lugs - Short Barrel

Nexus' range of cable terminate ends have teen designed to meet international standards. This ensures compliance with the demands of a majority of end user's lite tee Electrical Authorities, Contractors, Switch Board Panel Builders, Electrical Wholesale Outlets and Traders.
Copper specification: 99% IACS, to BS 601 7 1981 (1989). Copper finish: Electro Tinned to BS 18721984 (1984) The compliance with electrical specification are in accordance with the general requirement's. Initial/Final Resistance, Tensile “Pull Off” test and Cycling Periods, if necessary.
  • Compression joints for copper connections as per BS 4579 part 11970 (1988)
    We also manufacture the following terminals as per DIN standards:
  • Copper sealing ferrules as per DIN 46228
  • Copper Tubular terminals as per DIN 40500
  • Copper Tubular terminals as per DIN 46235

Copper Compression Lugs - Short Barrel

Copper Compression Lugs - Short Barrel at Nexus Stockyard

Copper Compression Lugs - Short Barrel

WIRE SIZE BOLT SIZE TANG WIDTH Dimensions O.D INCH. I.D INCH. Product Code
C D E F T
8 10 0.41 0.2 0.44 0.5 1.13 0.09 0.28 0.17 HCRA 8
6 10 0.41 0.2 0.81 0.5 1.5 0.09 0.3 0.2 HCRA 6
6 1/4 0.41 0.28 0.81 0.5 1.5 0.09 0.3 0.2 HCRA 6
4 10 0.5 0.2 0.81 0.5 1.5 0.09 0.34 0.25 HCRA 4
4 5/16 0.5 0.33 0.81 0.5 1.5 0.09 0.34 0.25 HCRA 4-516
4 1/4 0.5 0.28 0.81 0.5 1.5 0.09 0.34 0.25 HCRA 4
3 1/4 0.53 0.28 0.81 0.5 1.5 0.09 0.38 0.28 HCRA 3
2 1/4 0.59 0.28 0.88 0.75 1.81 0.11 0.42 0.31 HCRA 2
2 5/16 0.59 0.34 0.88 0.75 1.84 0.11 0.42 0.31 HCRA 2
2 3/8 0.59 0.41 1.09 0.75 2.03 0.11 0.42 0.31 HCRA 2
1 5/16 0.69 0.34 0.88 0.75 1.88 0.11 0.47 0.36 HCRA 1
1 1/4 0.69 0.28 0.88 0.75 1.88 0.11 0.47 0.36 HCRA 1-14
1 3/8 0.69 0.41 0.88 0.75 1.88 0.11 0.47 0.36 HCRA 1-38
1/0 5/16 0.75 0.34 0.88 0.75 1.88 0.13 0.52 0.39 HCRA 0
1/0 1/4 0.75 0.28 0.88 0.75 1.88 0.13 0.52 0.39 HCRA 0-14
1/0 3/8 0.75 0.41 0.88 0.75 1.88 0.13 0.52 0.39 HCRA 0
2/0 3/8 0.81 0.41 0.94 0.88 2.09 0.13 0.56 0.44 HCRA 2/0
2/0 1/4 0.81 0.28 0.94 0.88 2.09 0.13 0.56 0.44 HCRA 2/0-14
2/0 5/16 0.81 0.34 1.22 0.88 2.09 0.13 0.56 0.44 HCRA 2/0
3/0 3/8 0.91 0.41 1 1 2.31 0.13 0.61 0.48 HCRA 3/0
3/0 1/4 0.91 0.28 1 1 2.31 0.13 0.61 0.48 HCRA 3/0-14
3/0 1/2 0.91 0.53 1 1 2.31 0.13 0.61 0.48 HCRA 3/0
3/0 5/16 0.91 0.34 1.31 0.69 2.31 0.13 0.61 0.48 HCRA 3/0
4/0 3/8 1 13.32 1 1 2.34 0.14 0.69 0.55 HCRA 4/0
4/0 1/4 1 9.32 1 1 2.34 0.14 0.69 0.55 HCRA 4/0-14
4/0 1/2 1 0.53 1 1 2.34 0.14 0.69 0.55 HCRA 4/0
4/0 5/16 0.91 0.34 1.34 0.69 2.31 0.13 0.69 0.55 HCRA 4/0
250MCM 1/2 1.09 0.53 1.06 1.13 2.63 0.16 0.75 0.56 HCRA 250
250MCM 3/8 1.09 0.53 1.06 1.13 2.63 0.16 0.75 0.56 HCRA 250-38
300MCM 1/2 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300
300MCM 3/8 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300-38
300MCM 5/16 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300-516
300MCM 5/8 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300-58
350MCM 1/2 1.28 0.53 1.13 1.13 2.69 0.19 0.88 0.69 HCRA 350
400MCM 5/8 1.38 0.69 1.88 1.5 3.31 0.19 0.94 0.75 HCRA 400
400MCM 1/2 1.38 0.69 1.19 1.5 3.31 0.19 0.94 0.75 HCRA 400-12
500MCM 5/8 1.53 0.69 1.38 1.5 3.5 0.25 1.06 0.83 HCRA 500
500MCM 1/2 1.53 0.56 1.38 1.5 3.5 0.25 1.06 0.83 HCRA 500-12
600MCM 5/8 1.69 0.69 1.5 1.5 3.63 0.25 1.19 0.92 HCRA 600
600MCM 1/2 1.69 0.69 1.5 1.5 3.63 0.25 1.19 0.92 HCRA 600-12
*700MCM 5/8 1.78 0.66 1.38 1.75 3.97 0.27 1.25 0.98 *HCRA 700
*750MCM 5/8 1.91 0.66 1.63 1.94 4.34 0.27 1.31 1.03 *HCRA 750
*1000MCM 5/8 2.19 0.66 1.88 2.13 4.88 0.33 1.5 1.17 *HCRA 1000